April 08, 2013 EasyCopy 8.7.13 has been released and includes
March 01, 2013 The EasyCopy Company and AGI is now present in Houston. We have established an office to meet the needs of our valuable customers in the oil industry. Besides easy of use and ergonomi, service and support have always been high priority for us. With a local representation in Texas we are now here offering our best attention on a daily basis. We are so pleased to welcome Leslie Friedrich in the Houston EasyCopy team.
February 27, 2013 EasyCopy and especially EasyPlot 8.7.12 includes improved commandline and integration capabilities.
December 19, 2012 EasyCopy 8.7.11 includes several minor fixes for CGM, EMF, EPS, PDF. Better logging options has been implemented to meet customer requests. Via a new CSV log option a bunch of information can be available to be used in Excel, OpenIT, OpenLM or other logging tools. Even a mail option can be implemented if the sysadm like to receive mails when users could not get a license.
October 11, 2012 EasyCopy 8.7.10 has fixed a serious problem introduced in version 8.7.9 !! If you need 1:1 handling and have downloaded and installed version 8.7.9 please replace it with this build.
September 24, 2012 EasyCopy 8.7.9 has fixed several PDF issues, some CGM issues, Printing issues and included new stitch parameters
August 28, 2012 EasyCopy 8.7.8 has fixed several issues with printing and PDF reading and writing
June 15, 2012 Easycopy 8.7.7 Multi-page CGM issue, Edit Vector issues, Save as Vector issues, Font Substitution issues and more has been fixed and improved
May 30, 2012 Easycopy 8.7.6 Command Line and Large raster/vector file issues solved and improved
April 21, 2012 EasyCopy 8.7.5 is released. We have added Format Printer support for TIFF and PDF available both in EasyCopy and EasyPlot. It requires The EasyCopy Graphics Suite, EasyVect for EasyCopy and for EasyPlot you can upgrade to get this functionality. Other smaller issues have been addressed as well
April 04, 2012 EasyCopy 8.7.4 is released. A bugfix release solving issues with semi transparency for vector to vector conversion.
March 26, 2012 Now we hire in Texas. We are looking for a Technical, Training and Support representative for North America. See if this opportunity is just right for you.
March 23, 2012 EasyCopy 8.7.3 is released. A release with format improvements and huge print speed improvements especially for large PDF files. (See further details on the EasyCopy Subscriber Section).
February 01, 2012 EasyCopy 8.7.2 is released
January 12, 2012 Easycopy 8.7.1 was released. A release with added formats. EMF+, PDS, CGM Clear Text, Multipage CGM are on that list. Editing capabilities also for PDF files has been added and EasyPlot has been improved to meet the requirements of the largest companies.
November 16, 2011 EasyCopy 8.6.5 has been released. Improved, CGM, EMF and TIFF support and several fixes and improvements on printing
August 16, 2011 EasyCopy 8.6.4 has been released. Command line and EasyPlot improvements implemented and reported issues fixed
July, 01, 2011 EasyCopy 8.6.3 has been released. ISYS - iTerra Elite II is now supported. PDF improvements and reported issues fixed.
May 19, 2011 EasyCopy 8.6.2 has been released and includes several improvements and a couple of new features
April 04, 2011 EasyCopy 8.6 has been releases today. We have focused on Ergonomics and Usability and we can´t wait to get you updated.
February 03, 2011 Join us on Our goal with this EasyCopy end user community on Facebook is to create a forum where you, as a user, can share opinions, ask for or tell about EasyCopy tricks and features that have made your life easier, and suggest new features. We will be checking in at least twice a week to answer or comment. Perhaps another user will help you out too. A few Guidelines:
- Please use the discussion boards for questions, showcasing work etc.
- Note that while folks from EasyCopy do participate and run this page, we may not be able to respond to every comment or address specific discussions.
- Posts that aren't relevant to this community may be removed
We are looking forward to assisting you and to learning from you.
2013 September 22-27
The Easycopy product suite will be presented at the SEG Houston 2013
2014 March 10-12
The EasyCopy Company will look forward to meeting you at the GEO 2014 Middle East Geosciences exhibition
MyEasyCopy News Letters
- MyEasyCopy No. 1 - GEO / CAD
- MyEasyCopy No. 2 - GEO / CAD
- MyEasyCopy No. 3 - GEO / CAD
- MyEasyCopy No. 4 - GEO / CAD
- MyEasyCopy No. 5 - GEO / CAD
- MyEasyCopy No. 6 - GEO / CAD
New Houston, Texas office - even more accessible to our customers in the southwest
HOUSTON, TX release date March 01, 2013, AGI is pleased to announce the new Houston, Texas office located on 2500 E. TC Jester Boulevard, Ste 150H Houston TX, 77008 and that Leslie Carle Friedrich has been hired as EasyCopy Business Development Executive for the Americas (North and South America). Leslie will focus on expanding established client relations and developing new relationships. She will build on the increasing awareness of the graphics solutions delivered by The EasyCopy Company and how they can be used to optimize the workflow for the technical professionals working with advanced graphics and optimize the print and plot environment at our customers. ... Read more
- The EasyCopy Company announced today a new product release, v8.7 with improved PDF, PDS, EMF and CGM
- EasyCopy Continues Transformation from Useful Utility To Essential Tool with Version 8.6
- EasyCopy Graphics Suite 8.5 debuts with a powerful PowerPoint integration capability
- EasyCopy 8.4 focuses on Compelling Presentations, Fast Zoom and Intelligent Plotting...
- EasyCopy focuses on Log Printing...
- EasyCopy focuses on Drawing Tools, Vector Conversion...
- EasyCopy launches a Movie Creator to give technical professionals more versatility...
- EasyCopy and CAM Donate EasyCopy Site License to Michigan State University...
- EasyCopy and Dassault Systemes announce an Original Software Development Partnership Agreement...